Cold Working Studio Rental
Cold Working Studio Rental
Studio Rental Rates
All renters MUST have updated and signed Studio Rental Agreement and Risk and Release forms on file. All cold working studio rentals include use of basic equipment. Aprons, gloves and other safety protection (ears muffs, safety glasses and respiratory masks) are available. Premium and special request equipment may be used for an additional fee. There is a $50 fee to replace broken/damaged equipment from misuse.
Skills Test/Renter Assessment: If Renter has never taken a kiln forming class with SiNaCa, Renter must complete a rental assessment before studio rental is approved. This will take about an hour and will involve a few basic exercises to make sure the renter is comfortable with the basics of fusing and with usage of the equipment.
Orientation: All renters will be required to complete a brief orientation with a staff member prior to first rental day. This meeting will serve to answer any questions the Renter may have as well as cover the studio procedures to ensure comfort in the space before work is started.
Non Member | Studio Member | |
Per hour | ||
For all standard equipment | $24 | $0 |
For cutting lathe | $20 | $10 |
SiNaCa Assistant: The primary function of a SiNaCa Assistant in the cold working studio is to follow the direction of the artist that is renting the studio and the use of the assistant. A studio rental with a SiNaCa Assistant is not intended to be a substitute for a Private Lesson. A renter must be able to pass a Skills Test/Renter Assessment in order to use a SiNaCa Assistant.
SiNaCa Consultant: The primary function of a SiNaCa Consultant in the cold working studio is teaching new skills or offering other direct advice on a project. A studio rental with a SiNaCa Consultant is not intended to substitute for a Private Lesson. A renter must be able to demonstrate basic kiln forming fundamental skills to use a SiNaCa Consultant.
Private Lessons: Private Lessons are an opportunity to learn fundamental skills in cold working outside of our standard curriculum. A student can work at their own pace to learn the fundamentals before moving on to working with a SiNaCa Consultant.
Studio Equipment
Standard – Heavy | Standard – Light |
---|---|
12”- 18” lap wheel | Hand Polishing Pads |
Vertical wet belt sander | Loose SiC Grit |
Double spindle arbor (pumice & Ce) | Gryphon ring saw |
Two 10” Diamond tile saw | Gryphon convertible grinder |
Abrasive blast cabinet (33”W x 22”D) | Flexible Shaft Grinder |
Cordless drill with hole saw bits | |
Premium & Special Request | |
Czech cutting lathe (stone wheels) | Variable speed drill press |
Angle grinder with water feed |
Repair – UV Glue: Typically $25 for a clean break or $35/hour if grinding and polishing is needed. It could take up to one month for the project to be completed and there is always the potential for further damages to occur during the repair. Our artists/instructors are not responsible if there are further damages.
Bottle Cutting: $5/cut
It could take up to one month for the project to be completed. Bottles must be clean and extras should be brought due to potential breakage. Our artists/instructors are not responsible for bottles that break.
**Bottles will NOT have sharp jagged edges but they also will not have a polished ‘finished’ edge**
SiNaCa Studio Memberships
Blue Membership
- Access to Cold Working Equipment
- Unsecured, on site storage
Orange Membership
- Discount on torch rental
- Unsecured, on site storage
- Invitation to Monthly Studio Members Night
Green Membership
- Access to Layout Facility
- Unsecured, on site storage
- $3/hour kiln rental
- Invitation to Monthly Studio Members Night
Yellow Membership
- Discount on hourly Hot Shop rental
- Unsecured, on site storage
- Invitation to Monthly Studio Members Night
Mav Membership
- 20% off Flame Working Curriculum
- $5 off Flame Working Rental
- Fee for Cold Working Studio Waived
- Fee for Lay Out Studio Waived
Add On Cold Working
- Access to Cold Working Equipment